Canon ColorWave 3800, Operation Manual

Page: 150 / 358

Set the rotation mode
Introduction
If you want to turn an image, you can use the rotation settings. The setting allows you to turn the
image according to predefined rotation values or you can let the printer perform the rotation
automatically.
Choose one of the following values:
• [No rotation]
• [90°]
• [180°]
• [270°]
• [Short edge first]
• [Long edge first]
• [Short edge first with additional 180° rotation]
• [Long edge first with additional 180° rotation]
• [Automatic media saving]
• [Automatic media saving with additional 180° rotation]
Procedure
1.
Open the [Preferences] - [Print job defaults] tab.[Print job defaults]
2.
Click on [Edit] in the [Layout] section or click on the [Rotation] setting.
3.
Choose one of the values.
Select [Automatic media saving] or [Automatic media saving with additional 180° rotation] when
the print productivity is an important factor.
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
Set the rotation mode
150 Chapter 3 - Define your workflow with WebTools Express