manualshive.com logo in svg

Canon ColorWave 3800, Operation Manual

Share
Download
Canon ColorWave 3800 Operation Manual Download Page 213

Use the cloud to send a print job

Introduction

The cloud can be seen as a virtual network drive you use to send files to, but also to save and
share files on.

There are general cloud applications, such as SharePoint or applications via a HTTP URL, but
companies can also use their own private and internal clouds.

Before you begin

Create an external location via [WebDAV] in WebTools Express to enable your cloud connection
with the printer. For more information, see 

Create an external location

 on page 121

 .

Procedure

1.

Open your cloud application, on your mobile device.

2.

Depending on the application you use:
- add and save the file you want to print or...
- send the file to the printer.

Use the cloud to send a print job

Chapter 4 - Use the printing system

213

Summary of Contents for ColorWave 3800







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands