4
Turning the Power off
The procedure for turning the power off differs depending on whether or not a hard disk drive is
installed. If a hard disk drive is installed, always turn the power off by following the instructions
given for protecting the hard disk drive. (→ p. 5)
● If the printer is connected to a network, check that other computers are not
printing before you turn the power off.
● If you turn the power off when the ジョブ indicator is on, any printing data
remaining in the printer
’
s memory as well as printing data spooled on the
hard disk that is being processed (other than print data that has completed
storage processing) will be lost. Wait until the printing data that you need
has finished printing or go off-line, press the 排出 key to output the
printing data then turn the power off.
● Do not turn off the printer while printing.
● Do not turn off the printer during the self-diagnosis carried out immediately
after turning the power on.
● If a hard disk drive is installed, always check that the HDD indicator (green)
is not on. If the power is turned off while the HDD indicator (green) is on
(while the hard disk drive is being written into), this will damage the hard
disk drive and may render it inoperable.
● If a message appears on the display indicating that the NVRAM is initializing
or that the NVRAM is being written into, check that the message has
disappeared before you turn the power off.
● If a message appears on the display indicating the flash memory is being
written into or that the flash memory is being erased, check to make sure
the message has disappeared before you turn the power off.
■ If no hard disk drive is installed
1
Check that the ジョブ indicator is
off.
メッセージ/ HDD
Summary of Contents for Color Laser Shot LBP-2160
Page 1: ......
