manualshive.com logo in svg

Canon Color imageRUNNER C2880, Reference Manual

Share
Download
Canon Color imageRUNNER C2880 Reference Manual Download Page 167

Card Reader-C1

3-39

3

Optional Equipment

IMPORTANT

 

Once you have removed the control card, you cannot operate the machine until the 
control card is inserted again.

 

Department ID Management

This section describes how to change the password and page limit, and how to 
check the print totals when the control card is being used.

NOTE

 

The maximum number of digits that you can register for the password is seven. If you 
enter fewer than seven digits, the machine registers the password with leading zeros.

- Example: If <321> is entered, then <0000321> is registered.

Flow of Additional Functions Operations

This section describes the flow of Additional Functions operations when the 
optional Card Reader-C1 is attached.

NOTE

 

Settings specified from the Additional Functions screen are never changed when you 
press  

(Reset).

1

Press 

 (Additional Functions) 

➞

 [System Settings].

If the System Manager ID and System Password have been set, enter the System 
Manager ID and System Password 

using  

-  

(numeric 

keys) 

➞

 press 

 (Log 

in/Out).

The System Settings screen is displayed.

Summary of Contents for Color imageRUNNER C2880







































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands