- 7 -
Toner cartridge
memory
Development roller
Electrical
contacts
Sensor
IMPORTANT
●
To avoid damage, do not touch the development
roller sensors, electrical contacts or toner
cartridge memory on a toner cartridge.
9
Hold the cartridge and gently shake it several
times in all directions to evenly distribute the
toner inside.
Protective
cover
10
Remove the protective cover by pulling on
the tab. Keep the cover for future use.
11
Hold the cartridge on a flat stable surface
with one hand, and pull out the seal
completely with the other hand.
12
Insert the cartridge in the machine as far as it
will go. Keep the guides
,
on both sides
aligned with the grooves
,
(triangular
mark) on the machine. Please note that these
arrows are just for alignment purpose and do
not represent the color of the toner.
CAUTION
●
If the sealing tape is pulled out forcefully or stopped
at midpoint, toner may spill. If toner gets into your
eyes or mouth, wash it away immediately and
consult a physician.
NOTE
●
When handling a toner cartridge, press and hold
the blue buttons properly as shown in the figure.
Do not set it vertically or upside-down.
