E8
4 MODE SETTING
4 MODE SETTING
4-1. OPERATION MODES
This product has an information display on which various settings can be customized. There are three
operation modes below as a setting menu. One of the operation modes can be selected according to
usage and preference.
1. Basic mode: Items that can be set and viewed are limited in this mode, and are recommended to
users who do not require sophisticated settings. This product is factory-set to basic
mode.
2. Full mode:
All items can be set and viewed in this mode.
3. Analog mode: It is the mode chosen when not using a digital function at all.
This manual describes only the items that can be set on the Top screen in each mode.
For details on how to set them, refer to the "Information Display Manual" on the supplied CD-ROM.
4-2. SETTINGS IN BASIC MODE
The following nine settings can be made on the Top screen in Basic Mode.
1. Go to MENU screen
2. Auto iris gain settings
3. AUX switch assignment
4. Automatic adjustment of mechanical end
5. AUX1 switch assignment
6. Zoom tracking ON/OFF
7. AUX2 switch assignment
8. Iris torque settings
9. Zoom curve mode settings
For details on how to set each setting item, refer to "Information Display Manual" on the supplied CD-ROM.
[Trk]OFF
Shtl
A 1
A 2
MENU
IG: 50
A
Fr1P
Fr1P
[I-Tq]H
[Adj]
Initial Top screen in Basic Mode
MENU
[ Z.M. ]
A 2
A 1
Fr1P
IG: 50
Fr1P
[Trk]OFF
[I-Tq]H
Items displayed by scrolling
Items not scrolled
Summary of Contents for CN20x50 IAS H/E1
Page 2: ...ENGLISH VERSION ...
Page 7: ......
