Canon CDI-E075-010, User Manual

Page: 39 / 214

33
Preparing the Camera, Basic Functions
The LCD monitor can also be positioned as below.
1
Open the LCD monitor left 180 degrees
and tilt it 180 degrees toward the lens.
• In this position, icons and messages do not
appear on the LCD monitor.
• The image shown on the LCD monitor is
automatically flipped and reversed so that it
appears correctly from in front of the lens.
2
Fold the LCD monitor back against the
camera body.
• Fold it until it clicks into place against the
camera body. If it is not fully closed, the image
will appear reversed and icons and messages
will not display.
• Icons and messages will appear and images will
show properly (not reversed) when the LCD
monitor is folded right against the camera until
it clicks.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
In Replay mode, images do not appear reversed. Also, icons and messages always
show properly.
Switching between Display Modes
Pressing the button switches the LCD monitor display mode.
2
Shooting Mode
Pressing the button cycles the LCD monitor to the next mode each time
the button is pressed.
On (No Information)
➝
On (Information View)*
➝
Off
*Depending on the LCD monitor´s position, the information view may not display.