Canon C9055, Operating Manual

Page: 44 / 218

Multi-drawer Paper Deck-A1 (Optional)
1-32
1
Routine Maintenance
4
Slide the paper holder plate to align it with the desired paper size, as shown below .
5
Load all remaining paper whose size you want to change into the paper deck .
Load the paper below the loading limit of the paper holder plate.
When loading paper into the paper deck, take care not to cut your hands on the edges of the paper .
Paper which has been rolled or curled must be straightened out before loading it into the paper deck.
Make sure that the height of the paper stack does not exceed the loading limit mark ( ) on the inside of the paper deck.
Never place paper or any other items in the empty part of the paper deck next to the paper stack. Doing so may damage the machine.
If there are instructions on the package of paper about which side of the paper to load, follow those instructions.
When paper is loaded, the side facing up is the one printed on.
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it. However, textured paper,
single-sided coated paper, and paper already printed on cannot be turned over. Change to new paper.
When loading paper, make sure that the height of the paper stack does not exceed 13/16" (20 mm). If the height of the paper stack
exceeds 13/16" (20 mm), the edges of the paper stack may become curled or creased, and poor print quality may result.
•
•
•
•
•
•
•