Changing the Copy (Zoom) Ratio
2-26
2
Basic Cop
ying F
eatures
■
Entire Image
If you are copying an original with an image that extends all the way to the edges onto the
same size paper at a copy ratio of 100%, the periphery of the original image may be cut
off slightly on the copy. However, if you set the Entire Image mode, the image is slightly
reduced so that the entire image is copied without being cut off.
■
Reducing/Enlarging Using the Original and Copy Sizes
The Zoom Program mode enables you to enter measurements for the original and copy
sizes, then allows the machine to automatically calculate and set the appropriate copy
ratio.
The following two Zoom Program modes are available:
•
Making Copies with the Same XY Copy Ratio
The copy ratio you set is used for both the horizontal (X) and vertical (Y) axes.
X = 4" (100 mm)
X = 5 3/16" (132 mm)
LTR
LTR
Original
Copy
Summary of Contents for C3220
