Canon BW Remote Operators Software Kit-A1, Installation Procedure

Page: 10 / 12

Chapter 1
2
1.1 Installation procedure
1.1.1 Overview of the
Installation Procedure
0008-5793
As a rule, the user is expected to obtain a license key
and register it to the device. Detailed instructions are
found in the User's Guide. The following is an outline
of the instructions:
1. Using the following URL, access the LMS, and
obtain the license key by following the instructions
shown on the screen:
http://www.canon.com/lms/ir/
Memo:
A license key is issued in exchange for the 24-digit
number indicated on the License Access Number
Certificate and the serial number of the device (e.g.,
ABC01234) to which the license will be registered.
The device serial number will be indicated in
response to a press on the Counter key on the iR
device (under [Serial Number]).
2. Copy the 24-digit number shown on the Web
browser screen in the space given for the purpose on
the License Access Number Certificate sheet.
Caution:
Be sure to double-check the number to avoid an
error. Be sure that the user is aware of the
importance of the License Access Number
Certificate and that it must be stored away in a safe
place.
3. Make the following selections: user mode>system
control setup>license control. Then, type in the 24-
digit number, and click [Execute]. In response, the
license key will be registered and the appropriate
functions will be enabled. Otherwise, any of the
following error messages will appear:
"The number of the license key is not correct. Check
the license key."
>> Make sure that the license key is not issued for a
different device.
>> Make sure that the number has been correctly
typed in.
>> Make sure that the license key is the correct one.
"The function has already been enabled."
>> Make sure that the Kit has not already been
enabled.
4. Hold down the control panel power switch for 3 sec
or more. Follow the instructions shown on the screen
for shut-down sequence so that the main power switch
may be turned off. Turn off the main power switch,
wait for 10 sec, and turn it back on.
5. The registered license will become valid when the
device is turned back on. When it has started
normally, press the Counter key, and click the Device
Configuration button to make sure that the Kit is
indicated as part of the options.