manualshive.com logo in svg

Canon BJC-6200, Reference Manual

Share
Download
Canon BJC-6200 Reference Manual Download Page 210

210

Troubleshooting - The POWER Lamp Flashes Orange

■ 

Four flashes: BJ Cartridge out of ink

An ink tank in the BJ Cartridge has run out of ink.
Replace the depleted ink tank and press the RESUME button.

Replacing Ink Tanks

■ 

Five flashes: Cartridge not installed correctly

The correct cartridge is not installed.  When printing is to be performed,
install the BJ Cartridge for the BJC-6200.  When scanning is to be per-
formed, install the scanner cartridge.

BJ Cartridges You Can Use with the Printer
Scanning an Image

■ 

Six flashes: BJ Cartridge not installed

No BJ Cartridge is installed.  Select and install the BJ Cartridge (colour,
photo, or black) according to the work that you are doing.

Summary of Contents for BJC-6200


























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands