Canon AX-C4343W, Technical Document

Page: 34 / 86

4
Operating procedures
34
1
Charge the battery pack.
Charge the battery on the day of examination or on the previous day. Insert a
detector containing a battery pack into the Docking Station to charge it. Otherwise,
charge the battery pack by inserting in the battery charger. For details about the
operations, refer to the user’s manuals for the battery pack, the Docking Station and
the battery charger.
2
Attach the battery pack.
i)
Remove the battery cover.
• Press and hold the battery cover lock ( ) to release the lock, then lift up and pull out
the battery cover ( ).
4.1 Preparing to use the detector
CAUTION
Be sure to use only the dedicated battery pack for this product.
The battery pack attached to the detector can be charged in a wired
configuration. For details, refer to the user’s manuals for the Multi Box.
Battery slowly discharges even if not in use. The battery pack may have expired
if it discharges immediately after being fully charged. You can purchase an
optional battery pack to replace an exhausted one.
Information
Information
Place the detector on a flat surface before commencing the steps below.
Otherwise the battery pack may fall out while it is being attached.
Information
Cover lock Battery cover
000_DIA-2019-019-E03_AX-C4343W.book Page 34 Friday, November 27, 2020 12:38 PM