Canon AX-C4343W, Technical Document

Page: 26 / 86

3
Parts names and functions
26
The detector is designed to capture radiographic images.
3.1 Detector
A POWER switch When the detector is off, press the POWER switch (for
at least 0.5 seconds) to turn on the detector.
When the detector is on, press and hold the POWER
switch (for at least 3 seconds) to turn off the detector,
or press and hold the POWER switch (for 1 second or
less) to establish the communication link.
B Power LED Lights up when the detector turns on. Shows the
remaining battery pack charge.
C READY switch Press and hold the READY switch (for at least 1
second) to switch between detector selection status
(Sleep) and exposure ready status.
D READY LED This LED lamp flashes while the detector is
transitioning to exposure ready status, and lights up
when the detector enters exposure ready status.
Also flashes (approx. 3 seconds) when detector
linkage is initiated. Flashes in the case of errors.
A
B
C
D
E
H G F I J
000_DIA-2019-019-E03_AX-C4343W.book Page 26 Friday, November 27, 2020 12:38 PM