5
5
5-5
5-5
Adjustment > Pickup Feed System > Cassette Left Edge Margin Adjustment (1st side; Software Adjsutment)
Adjustment > Pickup Feed System > Cassette Left Edge Margin Adjustment (1st side; Software Adjsutment)
Adjustment
procedure
6) Tighten the fixing screw.
7) Return the cassette to its original position.
NOTE:
When the cassette positions are uneven due to the mechanical adjustment,
adjust them by loosening the 2 screws.
1x
1x
8) Make copies using the Cassette, and check that the left edge margin is 2.5 ±
1.5 mm.
T-5-5
Cassette Left Edge Margin Adjustment (1st side;
Software Adjsutment)
Adjustment
procedure
1) Make copies from cassette, and check that the left margin is 2.5 ± 1.5 mm (for
LTR/LGL: 4.2 ± 1.5 mm) .
Feeding direction
of paper
L1
image
2) If the left margin is out of the specification, change the adjustment value for the left
margin on the 1st side in cassettte.
Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1; 1 increment of the
value spreads out the left margin by 0.1 mm. (Image move to the right)
3) Make copies using the Cassette, and check that the left edge margin is 2.5 ±
1.5 mm.
4) Write down the new adjustment value on the service label.
• ADJ-C1
5) Exit from Service Mode.
T-5-6
Summary of Contents for AG1
