manualshive.com logo in svg

Canon A510 - PowerShot 3.2MP Digital Camera, User Manual

Share
Download
Canon A510 - PowerShot 3.2MP Digital Camera User Manual Download Page 127

125

Troubleshooting

Trou

bleshooting

Batteries consumed 
quickly

Batteries are not the right type.

z

Use only unused AA-size alkaline batteries or 
Canon AA-size NiMH batteries. (For 
information about alkaline batteries, see 

Proper Battery Handling 

(p. 16).)

Battery capacity drops due to low 
ambient temperatures.

z

If shooting in a cold area, keep the batteries 
warm (by placing them in an inner pocket, 
etc.) until ready to use them.

Battery terminals are dirty.

z

Wipe them well with a dry cloth before use.

z

Reload the batteries several times.

Batteries have not been used for 
over a year.

z

If using rechargeable batteries: Performance 
should return to normal after several charging 
cycles.

If using rechargeable batteries: 
Battery life exceeded.

z

Replace both batteries with new ones.

If using 
rechargeable 
batteries: Batteries 
do not charge in 
separately sold 
battery charger

Batteries were placed in the charger 
in the wrong direction.

z

Put batteries back into the charger in the 
correct direction.

Poor electrical contact, between 
batteries and the charger.

z

Be sure to set batteries firmly into the charger.

z

Be sure that the power cord is firmly 
connected to the charger, and is firmly 
plugged in to the power outlet.

Battery terminals are dirty.

z

Wipe them well with a dry cloth before 
charging.

Battery life exceeded.

z

Replace both batteries with new ones.

Summary of Contents for A510 - PowerShot 3.2MP Digital Camera




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands