Canon 9685A001AA - PowerShot G6 Digital Camera User Manual Download Page 34

Page: 34 / 211

Turning the Power On/Off (continued)

Powering the Camera in Shooting Mode

Powering the Camera in Playback Mode

Remove the lens cap.

Turn the mode lever to

(Shooting) while pressing the
release button.

The power/mode indicator lights orange.

Open the LCD monitor if needed (p. 33).

will appear in the display panel and a warning beep will

sound if you turn on the camera with the lens cap on. If this
occurs, remove the lens cap and turn the camera off and back
on.

Be careful not to touch the lens when shooting. Please also
refrain from forcing the lens with fingers or other objects. It could
lead to malfunctions or damage the camera. If this occurs, turn
the camera off and back on.

Open the LCD monitor and turn
the mode lever to

(Playback)

while pressing the release button.

The power/mode indicator lights green
and

appears on the display panel.

Release button

Summary of Contents for 9685A001AA - PowerShot G6 Digital Camera




















































































































































































































Search results

Summary of Contents for 9685A001AA - PowerShot G6 Digital Camera

Reviews:

Canon 9685A001AA - PowerShot G6 Digital Camera, User Manual, Page: 34 / 211

Search results

Summary of Contents for 9685A001AA - PowerShot G6 Digital Camera

Reviews: