3-1 Advisory for Replacement of Service Part (also for disassembly and
assembly)
CanoScan 8800F
Maintenance
3. Servicing
REPLACING SERVICE
PART
NOTE FOR REPLACEMENT*1
ADJUSTMENT /SETTING
UP
VERIFYING
OPERATION
MAIN PCB ASS'Y
Disconnect the power cord,leave the unit
about 1 minute (to discharge the stored
charge of the capacitor) and dismount
the part (to prevent MAIN PCB ASS'Y
broken)
Enforce scan operation
CARRIAGE ASS'Y
Be careful not to touch mirrors or CCD
PCBs.
Be careful not to put dirt or fingerprint on
the light guide.
Enforce scan operation
PLATEN GLASS ASS'Y
(FE2-0201-000)
Be careful not to put dirt or fingerprint on
the document glass.
Enforce visual inspection
1:Note for entire work
Have a careful look on the wiring arrangement of flexible cable and harness, and connection of connectors. [Refer to 3-2
Instruction for Servicing (1) Wiring arrangement of flexible cable and harness, and connection of connectors]
Be careful not to drop down ferrite core to be broken.
Be careful not to let electrostatic break electric parts down.
Disconnect the power cord, leave the unit about 1 minute (to discharge the stored charge of the capacitor) and dismount the
part (to prevent MAIN PCB ASS'Y broken).
Do not stain inappropriate part with TIMING grease. Do not scratch or damage parts and the unit.
Be careful not to damage or stain external cover.
Summary of Contents for 8800F - CanoScan - Flatbed Scanner
