manualshive.com logo in svg

Canon 7820A001 - i 850 Color Inkjet Printer, User Manual, Page: 127 / 191

Share
Download
Canon 7820A001 - i 850 Color Inkjet Printer User Manual Download Page 127

Print Quality is Poor or Contains Errors

127

Troubleshooting

Printing is Blurred/Colors are Wrong

■

Ensure that the clear film is completely removed from around the ink tank.

■

Ensure that the ink tanks snap into place when you install them.

■

If a specific color does not print, check whether the corresponding ink tank is 
empty. Replace if necessary.

■

Print the nozzle check pattern to ensure that ink is output correctly.

If the nozzle check pattern does not print correctly, clean the print head.

➡

Printing the Nozzle Check Pattern

➡

Print Head Cleaning

If the problem is not resolved after cleaning the print head several times, the print head 
may be worn out. Contact a Canon service representative.

Note

➤

Always ensure you dispose of the protective cap and protective tape from a 
print head.

■

Ensure you are printing on the correct side of the media.

You can only print on one side of certain media. 

Summary of Contents for 7820A001 - i 850 Color Inkjet Printer
































































































































































































Reviews:

No comments