background image

17

BEFORE OPERATION

HOW TO OPERATE ON-SCREEN MENU

FLOW OF ON-SCREEN MENU OPERATION

Display ON-SCREEN MENU

Press MENU button to display ON-SCREEN MENU (MENU
BAR).  A red frame is POINTER.

Move POINTER (red frame) to MENU ICON that you want to
select by pressing POINT RIGHT / LEFT buttons.

Adjust ITEM DATA by pressing POINT RIGHT / LEFT
buttons.
Refer to the following pages for details of respective
adjustments.

Press POINT DOWN button and move POINTER (red frame
or red arrow) to ITEM that you want to adjust, and then press
SET button to show ITEM DATA.

Select Menu to be adjusted

Control or adjust item through ON-SCREEN MENU

1

2

4

3

You can control and adjust this projector through ON-SCREEN
MENU.  Refer to the following pages to operate each adjustment
on ON-SCREEN MENU.

2  MOVING POINTER

3  SELECT ITEM

Move the pointer (

see below) or adjust the value of item by

pressing POINT button(s) on Top Control or on Remote Control
Unit.

Select an item or set the selected function by pressing SET button.

OPERATING ON-SCREEN MENU

Pointer is the icon on ON-SCREEN MENU to select the item.
See the section "FLOW OF ON-SCREEN MENU OPERATION"
below.

MENU

SET

FOCUS

ZOOM

KEY

STONE

Vol +

Vol –

Used to select the item.

SET BUTTON

Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.

POINT BUTTONS

TOP CONTROL

MENU BAR

POINTER
(red frame)

MENU ICON

ITEM DATA
Press POINT LEFT/RIGHT
buttons to adjust value or
set function.

POINTER (red frame)
Press POINT DOWN button to
move POINTER.

1  DISPLAY MENU

Press MENU button to display ON-SCREEN MENU.

ITEM

Used to select the item.

SET BUTTON

Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.

POINT BUTTON

REMOTE CONTROL UNIT

SET

BUTTON

Summary of Contents for 7355 - LV XGA LCD Projector

















































Reviews: