Fig. 1 Assembly
Measures to prevent the projector from falling
* Make sure to take measures to prevent the projector main body from falling as explained here.
Wire
clamp
A Screws
(included in package)
Wire
(included in package)
Adjuster
c
v
x
z
Projector main body
Screws (
A
)
Plus screw with round head M4 x 12 (3 pcs.)
with spring washer and flat washer
Screw (
B
)
Plus screw with round head
M4 x 40 (1 pc.) with spring washer
and flat washer
Main body mounting fitting (1 pc.)
Ceiling hanging
fitting
Main body mounting
fitting
1. Pull out the adjuster from the
projector main body.
2. Hang securely the drop
prevention wire included in the
package to the adjuster in the
main body (2 positions).
3. Tighten securely the wire clamp
with the drop prevention wire,
and push down the adjuster in
the main body.
4. Attach the drop prevention wire to
the main body mounting fitting
with two A screws (M4 x 12 mm)
included in the package. Attach
the drop prevention wire on the
opposite side in the same way.
Fix securely the main body
mounting fitting to the ceiling
hanging fitting with four A
screws (M4 x 12 mm)
included in the package.
2
取付ハンガー(LV-CL08) 03.8.26 7:40 PM ページ6
