Canon 600EXII-RT, Instruction Manual

Page: 38 / 148

38
Flash coverage (the range covered by the flash light) can be set
automatically or manually. With the <
L
> (automatic) setting, the flash
coverage is adjusted automatically according to the focal length
(shooting angle of view) of the lens in use and the image sensor size
(p.26). With the <
d
> (manual) setting, you can manually set flash
coverage in the range of 20 to 200 mm.
1
Press the <
[
> button.
Press function button 1 <
[
>.
X The flash coverage value is
highlighted.
2
Set the flash coverage.
When you want to set the flash
coverage automatically, select <
L
>.
When using the manual setting for
the flash coverage, select <
d
> and
the value (indicating the focal length
in mm).
Turn <
9
> to set the flash coverage,
then press <
8
>.
e
: Setting the Flash Coverage
N
When you set the flash coverage manually, set the same or a wider
coverage than the angle of view for shooting to avoid darkening the
periphery of the picture.
When a lens with a focal length less than 20 mm is attached, the
<
O
> warning is displayed on the LCD panel. When using a camera
with the image sensor size smaller than full-frame, the < O >
warning is displayed when the actual shooting angle of view is wider than
the angle of view of a 20 mm lens.
When shooting with the camera and Speedlite’s PC terminal connected
by a commercially-available sync cord, set the flash coverage manually.