Canon 5296B002, Instruction Manual

Page: 101 / 372

99
C : Setting Custom Functions
C.Fn-12:
3
(Flash recycle with external power)
0: 1 (External & internal power)
Charges in parallel using both internal power and external power.
1:
2
(External power only)
Internal power is needed to control the Speedlite. By using only external
power for charging, you can minimize the depletion of the internal power.
C.Fn-13:
6
(Flash exposure metering setting)
0:
4
(Speedlite button and dial)
1: 5 (Speedlite dial only)
You can perform flash exposure compensation by directly turning <
9
>,
without pressing the < @ > button.
C.Fn-20:
7
(Beep)
You can enable a beep to sound when the Speedlite is fully charged, or
when a slave unit is fully charged during radio wireless transmission flash
shooting.
Note that when set to
1 , a beep will sound as a warning when the flash
firing restriction is activated due to a temperature increase in the flash
head.
0: OFF (Disabled)
1: ON (Enabled)
COP
Y