Canon 5251B001 User Manual Download Page 125

Page: 125 / 220

125

Move the zoom lever toward

The display will zoom in on the image. If
you continue to hold the zoom lever, it will
zoom in up to a maximum factor of
approximately 10x.

If you press the

opqr

buttons, you can

move the location of the displayed area.

Move the zoom lever toward

to zoom

out, or continue to hold it to return to single
image playback.

If you turn the

dial, you can switch

images while zoomed.

Grouped images taken in

mode (p. 74) can also be viewed individually.

Choose an image group.

Press the

buttons or turn the

dial to

choose an image that displays

then press the

button.

View each image in the group.

If you press the

buttons or turn the

dial, only the grouped images will display.

If you press the

button, [Display all

images] will appear on the screen. Press
the

button to exit group playback.

Magnifying Images

Approximate Location of
Displayed Area

•

In magnified display, pressing the

button restores single image

playback.

•

Movies cannot be magnified.

Viewing Each Image in a Group

COP

Summary of Contents for 5251B001





























































































































































































































Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands

Canon 5251B001, User Manual

Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands