Canon 4K500ST User Manual Download Page 111

Page: 111 / 189

111

Menu Settings

Advanced

Guid

Me
nu Setting

Guide

Shows the guide screen.

Option

Function

Off

Hides the guide screen.

Shows the guide screen.

Show input status

Specify whether signal status is shown when there is no signal or when you are completing
signal settings.

Option

Function

Off

The input status is not displayed.

The input status is displayed.

Lamp warning display

Specify whether to show a lamp replacement message after the lamp has been used for a
specified period.

Option

Function

Off

The prepare lamp message and the lamp warning are not displayed.

The prepare lamp message and the lamp warning are displayed.

Air filter warning display

A message advising you to perform cleaning can be set to display when the filter needs
cleaning.

Option

Function

Off

The air filter warning is not displayed.

The air filter warning is displayed.

The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK] or [FREEZE] mode. (

P31

)

• When positional lock (

P98

) is set to [On] and buttons locked by this feature are

pressed.

• When it is almost time to replace the lamp, the projector’s [LAMP] indicator will

flash. For details, see “LED Indicator Displays” (

P28

• Setting display to [Off] will disable both the message to prepare a replacement lamp

and the warning to replace the lamp. To review the replacement timing, check the
lamp counter (

P118

• Lamps that are still used after the timing for lamp replacement are more likely to

rupture. Replace the lamp with a new one as soon as possible.

Setting [Air filter warning display] to [Off] will disable display of the warning to clean
the air filter. We recommend checking the air filter counter (

P119

) occasionally to

know when to replace the filter.

Summary of Contents for 4K500ST






























































































































































































Search results

Summary of Contents for 4K500ST

Reviews:

Related manuals for 4K500ST

Brands by name

Popular brands

Canon 4K500ST, User Manual

Search results

Summary of Contents for 4K500ST

Reviews:

Related manuals for 4K500ST

Brands by name

Popular brands