manualshive.com logo in svg

Canon 3114C008, Online Manual, Page: 213 / 480

Share
Download
Canon 3114C008 Online Manual Download Page 213

Paper other than Genuine Canon Paper

Common Name

Rear Tray

Cassette

Plain Paper (including recycled paper)

*1

Approx. 100 sheets (Legal:
10 sheets)

Approx. 250 sheets

Envelopes

10 envelopes

N/A

Greeting Card

Letter, 7"x10"(18x25cm): 1
sheet

N/A

*1 Normal feeding at maximum capacity may not be possible with some types of paper, or under very high
or low temperature or humidity. In this case, load half the amount of paper or less.
*2 Feeding from a loaded stack of paper may leave marks on the printed side or prevent efficient feeding.
In this case, load one sheet at a time.

Paper Load Limit of Paper Output Tray

Genuine Canon Paper

Paper for printing documents:

Media Name <Model No.>

Paper Output Tray

Canon Red Label Superior <WOP111>

Canon Océ Office Colour Paper <SAT213>

High Resolution Paper <HR-101N>

Approx. 50 sheets

Paper other than Genuine Canon Paper

Common Name

Paper Output Tray

Plain Paper (including recycled paper)

Approx. 50 sheets (Legal: 10 sheets)

When continuing printing with paper other than the above, we recommend removing already printed paper
or envelopes from the paper output tray to avoid smearing or discoloration.

213

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Reviews:

No comments