background image

DR-3010C

DR-3010C

32

Deskewing Documents

You can set the scanning conditions to detect slanted document pages and 
straighten the scanned images.
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box 

→ 

select the 

[Deskew] check box 

 click [OK].

For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings - Correcting Image Skewing," on p.44.
Documents exceeding the width of the sensor may become damaged. Also, the 
scanned image may not be output correctly.

Moire Reduction

You can set the scanning conditions to reduce the moire effect (a shimmering, 
wavy pattern) that often appears when scanning color documents or scanning in 
grayscale.
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box 

→ 

select 

[High Quality Moire Reduction] from the Moire Reduction drop-down list 

 click 

[OK].
For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings - Moire Reduction," on p.45.

Correcting the Text Orientation of Documents

You can set the scanning conditions to detect the text orientation in scanned 
images, and rotate the images in 90° increments as needed to normalize the 
orientation.
Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box 

→ 

select the [Text Orientation Recognition] check box 

 click [OK].

For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings - Text Orientation Detection," on p.50.

Reducing Bleed Through for Thin Documents and Documents with Dark 
Back Sides

You can set the scanning conditions to reduce bleed through when scanning thin 
document pages and those with dark content on the back side, or to remove the 
background from document images.
Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box 

 select the [Prevent Bleed Through / Remove Background] check box 

 click 

[Setting] 

 adjust the Removal level setting 

 click [OK] 

 [OK].

For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings - Preventing Bleed Through/Removing the Document 
Background," on p.50.

Deleting Borders and Ruled Lines of a Specified Color (Red/Green/Blue)

You can set the scanning conditions to omit borders and ruled lines of a specified 
color (red, green, or blue) from the scanned image. However, this function is only 
available when scanning in black-and-white.
Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box 

 select the colors to omit from the Front and Back drop-down lists 

click [OK].
For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings - Omitting a Specific Color," on p.51.

Deskew On

Deskew Off

X

Color Drop-out (Red)

Document to Scan

X

Summary of Contents for 3093B002
























































































Reviews: