Canon 2691B001 Instruction Manual Download

Page: 68 / 87

68 •

Additional Information

Even without a disc loaded, when
closing the disc compartment cover a
motor sound can be heard.

- The camcorder is checking if a disc is

loaded or not. This is not a malfunction.

Cannot open the disc cover to remove
the disc.

- Turn off the camcorder, disconnect the

compact power adapter and remove
the battery pack. Restore the power
supply and try again.

- The camcorder has exceeded its

operational temperature. Turn off the
camcorder and let it cool down before
resuming use.

The disc cannot be recognized.

- The disc is dirty. Clean the disc with a

soft lens-cleaning cloth (

74). If the

problem persists replace the disc.

- The disc is not correctly loaded. Check

the disc (

23).

- Verify that the camcorder supports the

type of DVD disc you inserted (

3).

The camcorder vibrates.

- Depending on the condition of the disc,

the camcorder might vibrate
occasionally. This is not a malfunction.

•

The disc’s rotation can be faintly heard.

•

Occasionally the operation sound can

be heard.

- The disc is activated from time to time.

This is not a malfunction.

•

After using the camcorder for a long

time, it becomes hot.

•

lights up in red.

- This is not a malfunction. Turn the

camcorder off and let it cool for a while
before resuming operation.

Recording

Image will not appear on the screen.

- Set the camcorder to

mode (

26).

- Open the lens cover.

Pressing

will not start

recording.

- Set the camcorder to

mode (

26).

- Load a disc that has been tested

(

4).

- The disc is full (“

END” appears on

the screen). Delete some recordings
(DVD-RW in VR mode) to free some
space (

33) or replace the disc.

- The camcorder has exceeded its

operational temperature. Turn off the
camcorder and let it cool down before
resuming use.

- Unfinalize (

46) the disc (DVD-RW in

VIDEO mode).

Even after stopping recording, the disc
access indicator does not go off.

- The scene is being recorded on the

disc. This is not a malfunction.

The point where

was pressed

does not match the beginning/end of the
recording.

- There is a slight interval between

pressing

and the actual start

of the recording on the disc. This is not
a malfunction.

The recording suddenly stops shortly
after starting recording.

- The disc is dirty. Clean the disc with a

soft lens-cleaning cloth (

74). If the

problem persists replace the disc.

- The camcorder has exceeded its

operational temperature. Turn off the
camcorder and let it cool down before
resuming use.

Camcorder will not focus.

- Autofocus does not work on that

subject. Focus manually (

38).

- If you are using the viewfinder, adjust it

with the dioptric adjustment lever
(

27).

- Lens is dirty. Clean the lens with a soft

lens-cleaning cloth (

74). Never use

tissue paper to clean the lens.

Sound is distorted.

- When recording near loud sounds (such

as fireworks or concerts), sound may
become distorted.

A vertical light bar appears on the
screen.

- Bright light in a dark scene may cause a

vertical light bar (smear) to appear. This
is not a malfunction.

Start/Stop

Summary of Contents for 2691B001
























































































Search results

Summary of Contents for 2691B001

Reviews:

Related manuals for 2691B001

Brands by name

Popular brands

Canon 2691B001, Instruction Manual

Search results

Summary of Contents for 2691B001

Reviews:

Related manuals for 2691B001

Brands by name

Popular brands