Canon 2669B001, User Manual

Page: 150 / 179

150
If you use AC Adapter Kit ACK-DC30 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
Insert the coupler.
●
Open the cover (p. 14) and insert the
coupler as shown until it locks into place
with a click.
●
Close the cover (p. 14).
Plug the cord into the camera.
●
Open the cover and fully insert the plug
into the coupler.
Connect the power cord.
●
Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
●
You can turn the camera on to use it.
●
After you finish, turn off the camera and
unplug the power cord from the power outlet.
High-Power Flash HF-DC1 (sold separately) is used to supplement the
camera’s built-in flash when the subject is too far away for proper
illumination. For details on attaching and using the High-Power Flash, refer
to the user guide provided with the flash.
When in
D
mode (p. 89)
Using Household Power
Do not unplug the power cord with the camera turned on. This could
erase images you have taken or damage the camera.
When can you not use the HF-DC1?
Using a Supplementary Flash
COP
Y