Canon 2566B001 User Manual Download

Page: 194 / 244

192

When the power is turned on

“Card locked!” message appears.

The SD memory card’s or
SDHC memory card’s
write protect tab is set to
“Write protect”.

When recording to, erasing from or
formatting the memory card, slide the
write protect tab upward (p. 212).

The Date/Time menu appears.

The built-in rechargeable
lithium battery charge is
low.

Recharge the built-in battery
immediately (p. 15).

LCD monitor

Nothing displays.

The LCD monitor is set
not to display.

Press the

DISP.

button to turn on the

LCD monitor (p. 60).

[Power Saving] is set to
[Display Off].

Press any button other than the power
button or change the camera
orientation to turn the LCD monitor
back on (p. 174).

The LCD monitor will shut off during shooting.

If [Power Saving] is set to [Display Off], the power saving function
will shut down the LCD monitor while shooting in

mode.

Camera screen is black at start-up.

Incompatible image has
been selected as the
startup image in the My
Camera settings.

Change the start-up image in the My
Camera settings (p. 188) or use the
supplied software program
ZoomBrowser EX or ImageBrowser to
restore the default settings. See

ZoomBrowser EX/ ImageBrowser
Software User Guide

(PDF).

Summary of Contents for 2566B001





















































































































































































































































Search results

Summary of Contents for 2566B001

Reviews:

Related manuals for 2566B001

Brands by name

Popular brands

Canon 2566B001, User Manual

Search results

Summary of Contents for 2566B001

Reviews:

Related manuals for 2566B001

Brands by name

Popular brands