manualshive.com logo in svg

Canon 2438C006, User Manual

Share
Download
Canon 2438C006 User Manual Download Page 283

<Special Processing>(P. 225) 

●

A desirable effect may not be attained even with these settings applied.

Is the machine installed in the appropriate environment?

●

Install the printer in an appropriate location.

Installation(P. 3) 
Relocating the Machine(P. 251) 

●

Store the toner cartridge in an appropriate location for two to three hours, then try printing again. This
may solve the problem. If the problem persists, replace the toner cartridge.

Replacing the Toner Cartridge(P. 243) 

Has the drum cartridge been left in direct sunlight for a long period of time?

●

Store the drum cartridge in an appropriate location for two to three hours, then try printing again. This
may solve the problem. If the problem persists, replace the drum cartridge.

Replacing the Drum Cartridge(P. 246) 

White Spots Appear

 

Are you using paper that has absorbed moisture?

●

Replace with appropriate paper.

Loading Paper(P. 95) 

 

Are you using appropriate paper?

●

Check usable paper, and replace with appropriate paper.

Available Paper(P. 317) 
Loading Paper(P. 95) 

Is the amount remaining in the toner cartridge running low?

●

Check how much the amount remaining in the toner cartridge is left, and replace the toner cartridge as
necessary.

●

Regardless of the amount remaining in the toner cartridge, the toner cartridge may reach the end of its
lifetime depending on the use environment or the deterioration of materials inside the toner cartridge.

Replacing the Toner Cartridge(P. 243) 

Troubleshooting

278

Summary of Contents for 2438C006






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands