Canon 2438C006 User Manual Download Page 248

Page: 248 / 373

Replacing the Toner Cartridge

23FJ-049

The machine displays a message when the amount remaining in the toner cartridge is low. Note that the print quality

may suffer if you continue printing without resolving this issue. You can check the amount remaining in the toner

cartridge on the display ( Checking the Remaining Amount of Consumables(P. 250) ).

When a Message Appear(P. 243)
Procedure for Replacing the Toner Cartridge(P. 244)

When a Message Appear

The message that is displayed depends on the amount remaining in the toner cartridge. Depending on which message

is displayed, prepare a new toner cartridge ( Consumables(P. 256) ) or replace the current toner cartridge with a

new one ( Procedure for Replacing the Toner Cartridge(P. 244) ).

<Preparing a toner cart. is recommended.>

This message notifies you that the toner cartridge needs to be replaced soon. Make sure that you have a

replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print

a large job.

When this message is displayed

●

When printing, you can continue printing the original.

Specify when this message is displayed

●

You can set any value as the percentage of the amount remaining in the toner cartridge that triggers
this message. <Displ. Timing for Cartridge Prep. Notif.>(P. 225)

<Toner cart. life end. Replcmt. recommended.>

This message notifies you that the toner cartridge has reached the end of its lifetime. It is recommended that

you replace the toner cartridge with a new one. You can continue printing, but the print quality cannot be

guaranteed.

<Status Monitor>

Select <Status Monitor> <Error Information/Notification> <Toner Cartridge End of Lifetime> to display the

procedure for replacing the toner cartridge.

To replace a consumable

Maintenance

243

Summary of Contents for 2438C006






















































































































































































































































































































































































Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands

Canon 2438C006, User Manual

Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands