Canon 2438C006 User Manual Download Page 259

Page: 259 / 373

Printing Reports and Lists

23FJ-04H

You can print reports and lists to check information such as machine settings.

Printing Lists of Settings(P. 254)
Printing Reports and Lists on the Usage Status of the Machine(P. 254)

Printing Lists of Settings

You can print information and settings registered in the machine as a list.

User Data List

You can check the list of the settings ( Setting Menu List(P. 194) ) as well as the content that has been

registered in the machine by printing a User Data List.

<Menu> <Output Reports> <User Data List> Check that the size and type of paper displayed
on the screen is loaded in the machine <OK> <Yes>

Printing Reports and Lists on the Usage Status of the Machine

You can print the following machine status reports.

Eco Report

You can check the monthly total volume of printouts and the power consumption with a report. This report

includes tips that are useful for saving paper and power consumption based on the usage status.

<Menu> <Output Reports> <Eco Report> Check that the size and type of paper displayed on
the screen is loaded in the machine <OK> <Yes>

●

The amount of power consumption may vary depending on the environment and conditions where
the machine is used.

Consumables Status Report

You can check the consumables status installed in the machine with a report.

Maintenance

254

Summary of Contents for 2438C006






















































































































































































































































































































































































Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands

Canon 2438C006, User Manual

Search results

Summary of Contents for 2438C006

Reviews:

Related manuals for 2438C006

Brands by name

Popular brands