Canon 2239B001 User Manual Download Page 65

Page: 65 / 163

Shoo

tin
g

Aim the camera so that the original color
appears at the center of the LCD monitor
and press the

button.

Only one color can be specified.

You can use the

button to specify the range of col-

ors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to

swap

Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the

button.

• Only one color can be specified.

Press

to complete the setting, then

shoot.

The default setting for color swap mode changes green into
white.

You may not obtain the expected results if you use the
flash.

The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.

Summary of Contents for 2239B001




































































































































































Search results

Summary of Contents for 2239B001

Reviews:

Related manuals for 2239B001

Brands by name

Popular brands

Canon 2239B001, User Manual

Search results

Summary of Contents for 2239B001

Reviews:

Related manuals for 2239B001

Brands by name

Popular brands