Canon 2213C002, Instruction Manual

Page: 100 / 183

Cu s tom Picture S etting s
100
Custom Picture Settings
The camera lets you change many settings (
A
103) that control various aspects of the image produced. As a
set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 6 custom picture files (in the camera or on a card), and load them later to apply
exactly the same settings (
A
102). You can also save the custom picture file as part of the metadata recorded
with XF-AVC clips (
A
102).
This function can only be used when the shooting mode is set to
’
,
‚
,
“
or
n
.
Selecting Custom Picture Files
Enable the custom picture function, and then select a custom picture file to use.
1 Enable the cu s tom picture function and then s elect [
X
].
[
v %
Camera Setup]
>
[
/
Function]
>
[
i
On]
2 S elect a cu s tom picture file.
[FUNC]
>
[ ]
• Select the desired custom picture file.
• When you close the menu, the selected custom picture file’s settings will be applied.
Preset Picture Settings
The following settings are saved to custom picture files C1 to C6 as preset custom picture settings. Custom
picture files C1 to C4 are protected by default and need to be unprotected before they can be edited.
NOTES
• To use the settings of a custom picture file saved on a card, copy the file to the camera in advance (
A
102).
• Shooting modes cannot be used when infrared recording is activated.
About the logarithmic gamma curves (Canon Log 3 settings)
- These gamma curves require post-production processing. They were designed to make the most of the
imaging sensor characteristics in order to obtain impressive levels of dynamic range.
- There are LUTs available that can be applied for processing in post-production. For the latest information on
available LUTs, please visit your local Canon website.
Operating modes:
Preset custom
picture file
[Gamma/Color Space] [Color Matrix] Characteristics
C1: [Normal] [BT.709 Normal / BT.709] [Video] These settings are optimized for playback on TV monitors.
C2: [Wide DR] [BT.709 Wide DR / BT.709] [Video]
These settings produce a wide dynamic range and are appropriate for playback
on a TV monitor.
C3: [LOG3] [Canon Log 3 / BT.709] [Neutral]
These settings use Canon Log 3 gamma and require post-production
processing.
C4: [EOS Std.] [EOS Std. / BT.709] [EOS Std.]
These settings approximate the look of an EOS interchangeable lens camera
when the picture style is set to [Standard]. Produces higher contrast than with
the [BT.709 Normal] setting.
C5: [USER05]
C6: [USER06]
[BT.709 Normal / BT.709] [Video]
These settings are optimized for playback on TV monitors.