Cu
s
tom Picture
S
etting
s
102
Saving a Custom Picture File
Copying Custom Picture Files
You can copy custom picture files between the camera a card. Insert in advance into the camera the card where
you want to save your custom picture files or the card that contains the custom picture file you want to load.
Copying a File from the Camera to a Card
1 Select [Save].
i
>
[Save
/
File
7
]
>
[Save]
2 Select the destination file on the card and then select [OK].
• Select an existing custom picture file to overwrite it or [New File] to save the settings as a new custom
picture file on the card.
3 When the confirmation message appears, press SET.
NOTES
• Custom picture files are exclusively compatible for use only with the same camera model.
Replacing a File in the Camera with a File on a Card
1 Select [Load].
i
>
[Save
/
File
7
]
>
[Load]
2 Select the file with the settings that you want to replicate and then select [OK].
• The file in the camera will be overwritten by the one on the card.
3 When the confirmation message appears, press SET.
Embedding the Custom Picture File in Clips (CAMERA Mode)
When you record in XF-AVC format after having set custom picture settings, you can have the custom picture file
embedded in the metadata and saved along with the clips.
Select [
Æ
Recording Setup]
>
[Add
/
File]
>
[On].
