manualshive.com logo in svg

Canon 2207C025, User Manual

Share
Download
Canon 2207C025 User Manual Download Page 92

Loading Paper

2357-020

You can load the paper into the drawer. See  Available Paper(P. 278)  for available paper sizes and types.

About Paper

Precautions for Paper(P. 87) 
Storing the Paper Printed with the Machine(P. 88) 

How to Load Paper

Loading Paper in the Drawer(P. 89) 
Loading Envelopes(P. 92) 
Loading Preprinted Paper(P. 94) 

Configuring the Settings for the Loaded Paper

Specifying Paper Size and Type(P. 95) 

Precautions for Paper

Do not use the following types of paper:

●

A paper jam or printing error may occur.
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Damp paper
- Very thin paper
- Thin coarse paper
- Paper printed by a thermal transfer printer
- Back side of paper printed by a thermal transfer printer
- Highly textured paper
- Glossy paper

Notes on use of paper

●

Only use paper that has fully acclimatized to the environment in which the machine is installed. Using paper
that has been stored under different temperature or humidity conditions may cause paper jams or result in
poor print quality.

Paper handling and storage

●

It is recommended that you use paper as soon as possible after unwrapping. Paper remaining unused
should be covered with the original wrapping paper and stored on a flat surface.

Basic Operations

87

Summary of Contents for 2207C025












































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands