Canon 2/3 Hole Puncher Unit-A1, Service Manual

Page: 32 / 72

5. After punching, the paper is fed to the finisher feeding unit. At the same time, the punch slide unit moves to the home position.
Punch Slide Unit
Paper
Punch Shift Motor (M302)
Punch Slide HP Sensor (PS302)
6. During punch mode, the operation described in steps 1 to 5 is repeated for every sheet that is fed.
< Related service mode >
• (Lv.1) SORTER > ADJUST > PNCH-Y: Adjusting the punch hole position in the horizontal registration direction
• (Lv.1) SORTER > ADJUST > PNCH-X: Adjusting the punch hole position in feed direction
• (Lv.1) SORTER > FUNCTION > FN-SENS1: Adjusting the punch horizontal registration sensor
• (Lv.1) SORTER > OPTION > PUCH-SW: Switching the high-productivity punch mode or high-accuracy punch mode of the
puncher unit
• (Lv.1) SORTER > OPTION > PUN-Y-SW: Setting whether to perform the horizontal registration operation of the puncher
unit for matching with the center of the paper
• (Lv.1) SORTER > OPTION > PNCH-SW3: Setting ON/OFF of the mode to improve the precision of the punch hole position
< Related error code >
• E593-8001: Punch Shift Motor error
• E593-8002: Punch Shift Motor error
2. Technical Explanation
26