Canon 1861B001 Advanced User'S Manual Download Page 93

Page: 93 / 163

Playb

ack/Erasing

You can record a continuous sound memo for up to approximately
2 hours without taking a picture.

Erase
Select [Erase] in the confirmation screen and press the

FUNC./SET

button.

You cannot attach sound memos to movies.

Sound memos for protected images cannot be erased.

Sound-Only Recording (Sound Recorder)

(Play) Menu

See

Menus and Settings

(p. 23).

Select

(Record) and press

The elapsed recording time

displays.

You can use the

button to

change the sampling rate.
The recording quality rises
progressively as you select [11.025
kHz], [22.050 kHz] or [44.100 kHz]*,
but the recorded file sizes increase
correspondingly.

*Default setting.

Press the

FUNC./SET

button to stop the recording session.

Pressing the button again starts a new recording session.

Remaining Time

Sound Recorder Panel

Summary of Contents for 1861B001




































































































































































Search results

Summary of Contents for 1861B001

Reviews:

Related manuals for 1861B001

Brands by name

Popular brands

Canon 1861B001, Advanced User'S Manual

Search results

Summary of Contents for 1861B001

Reviews:

Related manuals for 1861B001

Brands by name

Popular brands