Canon 1750, Service Manual

Page: 199 / 358

4
4
4-81
4-81
Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Procedure
Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Procedure
2) Lock the 2 Fixing Lock Levers [1], and secure the Fixing Assembly [2].
[1] [1] [2]
3) Close the Right Door Unit.
F-4-165
Removing the Fixing Drive Unit
■ Preparation
1) Remove the Rear Cover.(Refer to page 4-24)
2) Remove the Right Rear Cover.(Refer to page 4-26)
3) Remove the Waste Toner Container.(Refer to page 4-67)
4) Remove the Drum Unit.(Refer to page 4-68)
5) Remove the Main Drive Unit.(Refer to page 4-73)
6) Remove the Fixing Assembly.(Refer to page 4-79)
■ Procedure
1) Disconnect the 2 Connectors [1] and remove the 2 Wire Saddles [2] and the Reuse Band [3].
[1]
[2]
x2
x2
[3]
F-4-166