Canon 1730, Service Manual

Page: 290 / 358

8
8
8-41
8-41
Service Mode > Details of Service Mode > #SYSTEM > Details of System Numeric
Service Mode > Details of Service Mode > #SYSTEM > Details of System Numeric
● SW09
List of Functions
Bit Function 1 0
0 PS > Display/hide data protocol menu Displayed Hide
1 Long length setting ON OFF
2 User time setting flag Set Not set
3 Forced invalidity of uniFLOW ON OFF
4 - -
5 - -
6 - -
7 - -
Detailed Discussions of Bit 0
You can select whether to disable export of PWD in the address book.
Default: 0
Detailed Discussions of Bit 1
You can select whether to enable long length setting (to extend the range of user-defined
size).
Default: 1
Detailed Discussions of Bit 2
Whether the user made time setting can be checked.
Detailed Discussions of Bit 3
Select whether to set the forced invalidity of uniFLOW.
Default: 0
If turning ON this switch, and turning OFF and then ON the device power while the
uniFLOW function is in active state, the uniFLOW function is forcibly deactivated. In
addition, when this switch is ON, Activate/Deactivate request from the server is ignored.
● SW10
List of Functions
Bit Function 1 0
0 - -
1 To set the display of installation NAVI "Setting screen for date and time". Hidden Display
2 To set the display of installation NAVI "Registering user telephone number". Hidden Display
3 To set the display of installation NAVI "Setting screen for user abbreviation". Hidden Display
4 To set the display of installation NAVI "Selection screen on a line type basis". Hidden Display
5 To set the display of installation NAVI "Selection screen for reception mode". Hidden Display
6 To set the display of installation NAVI "Setting screen for IP address".
Hidden Display
7 - -
T-8-49
T-8-50
Detailed Discussions of Bit 1
When "1" is set, "Setting screen for date and time" of the installation NAVI can be hidden.
Detailed Discussions of Bit 2
When "1" is set, "Registering user telephone number" of the installation NAVI can be hidden.
Detailed Discussions of Bit 3
When "1" is set, "Setting screen for user abbreviation" of the installation NAVI can be hidden.
Detailed Discussions of Bit 4
When "1" is set, "Selection screen on a line type basis" of the installation NAVI can be hidden.
Detailed Discussions of Bit 5
When "1" is set, "Selection screen for reception mode" of the installation NAVI can be hidden.
Detailed Discussions of Bit 6
When "1" is set, "Setting screen for IP address" of the installation NAVI can be hidden.
■ Details of System Numeric
● 20: Display setting of installation NAVI (Other settings)
When "1" is set, "Other settings" of the installation NAVI can be hidden.
Default: 0
● 39: Change of default of LDAP advanced search condition
Change of the default of the LDAP advanced search condition can be set.
0: Includes
the next
1: Not include
the next
2: Equivalent
to the next
3: Not equivalent
to the next
4: Starts with
the next
5: Finishes
with the next
●
41: PS mode 1(8bit)
The PS mode 1 (8bit) can be set.
● 42: ePS mode 1(8bit)
The PS mde 2 (8bit) can be set.
●
57: Setting of paper size group
A paper size group can be set.
1: AB (PAPER_SIZE_GROUP_AB)
2: A (PAPER_SIZE_GROUP_A)
3: INCH (PAPER_SIZE_GROUP_INCH)
4: AB/INCH (PAPER_SIZE_GROUP_AB_INCH)
Initialization takes place when the following service mode is executed:
(CLEAR>ALL, TYPE, SERVICE DATA, TEL & USER DATA)