Canon 1418C025 User Manual Download Page 370

Page: 370 / 466

Paper Is Fed Incorrectly

19Y4-067

Printouts Are Skewed

Do the paper guides align with the edges of the paper?

●

If the paper guides are too loose or too tight, the printouts are skewed.

Loading Paper(P. 36)

Is the paper source the manual feed slot?

●

Load the paper into the paper drawer.

Loading Paper in the Paper Drawer(P. 38)

Are you printing on curled envelopes?

●

Uncurl the envelopes, and print again.

Loading Envelopes(P. 43)

Paper Is Not Fed/Two or More Sheets Are Fed Together

Is paper loaded correctly?

●

Fan the paper stack thoroughly so that paper is not stuck together.

●

Check whether paper is loaded correctly.

Loading Paper(P. 36)

●

Check whether the number of sheets of paper loaded is appropriate and whether the appropriate paper is
used.

Paper(P. 408)

Troubleshooting

364

Summary of Contents for 1418C025



















































































































































































































































































































































































































































































Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands

Canon 1418C025, User Manual

Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands