Canon 1418C025 User Manual Download Page 209

Page: 209 / 466

Changing the Maximum Transmission Unit

19Y4-043

In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a chunk of

data into which the original data is divided before being sent. The maximum transmission unit (MTU) may vary on each

network. Change the settings of the machine as necessary. For more information, contact your Network Administrator.

Press

Use

to select <Network Settings>, and press

●

If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press

. Setting

the System Manager PIN(P. 222)

Select <TCP/IP Settings> <MTU Size>.

Select the MTU, and press

LINKS

Configuring Ethernet Settings(P. 201)
Setting a Wait Time for Connecting to a Network(P. 204)

Network

203

Summary of Contents for 1418C025



















































































































































































































































































































































































































































































Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands

Canon 1418C025, User Manual

Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands