Canon 1418C025 User Manual Download Page 146

Page: 146 / 466

Making the Best Use of the Machine by Utilizing
Applications

19Y4-030

You can use an appropriate application that enables you to perform printing, scanning, or other operation by

operating the machine from your mobile device. The machine supports a dedicated application from Canon and

various other applications. You can select the most appropriate application to your mobile device, the purpose, the

situation, and so on.

◼

Printing/Scanning via Canon PRINT Business

You can print from mobile devices that support iOS/Android, and place and scan originals with the machine, then send

to a mobile device. When printing, it is not necessary to perform operations on the machine. For more information on

supported operating systems, detailed setting methods, and operations, see the Canon website (http://

www.canon.com/).

◼

Printing with Canon Print Service

You can easily print from the menu of applications that support the Android print subsystem. For more information on

supported operating systems and detailed settings and procedures, see the Canon website (http://www.canon.com/).

◼

Using Google Cloud Print

You can print from an application or service that supports Google Cloud Print. You can print by remotely operating the

machine at any time and from anywhere, for example even while you are on the go. Using Google Cloud

Print(P. 152)

◼

Printing with Mopria™

This machine also supports Mopria™. Using Mopria™ allows you to print with printers of different models from

different manufacturers by using common operations and common settings. For example, assume that Mopria™

compatible printers of different models from different manufacturers are installed in your office, at your place, or at

places you are visiting. You can then print with any of those printers by using Mopria™ without the need to install the

respective dedicated applications on them. For details about the models supporting Mopria™ and the system

requirements, see http://www.mopria.org.

Can Be Used Conveniently with a Mobile Device

140

Summary of Contents for 1418C025



















































































































































































































































































































































































































































































Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands

Canon 1418C025, User Manual

Search results

Summary of Contents for 1418C025

Reviews:

Related manuals for 1418C025

Brands by name

Popular brands