Canon 0585C006, Instruction Manual

Page: 50 / 108

50
To perform radio transmission wireless shooting, set the sender unit
and receiver unit with the following procedure.
Set to <
'
h
>.

Press the < I > button of the <
S
>
cross keys.

Turn < 9 > to select < ' h >,
then press < 8 >.
Set to <
'
i
>.

Operate and set the flash you want to
set as the receiver unit.

Select < ' i > in the same way
as for the sender unit setting.
To avoid interference with wireless flash systems using radio
transmission used by other photographers or with other devices using
radio waves (wireless), you can change the transmission channel and
wireless radio ID.
Set the same channel and ID for both the sender
unit and receiver unit.
Wireless Settings
Sender Unit Setting
Receiver Unit Setting
Transmission Channel/Wireless Radio ID Settings
To perform normal flash shooting, select <
F
> to clear the wireless
(sender/receiver) settings.
When establishing multiple radio transmission wireless flash systems,
interference between flash systems may occur even if the flashes are set to
different channels. Set different wireless radio transmission IDs for each
channel (p.51).