Canon 0585C006, Instruction Manual

Page: 51 / 108

51
Wireless Settings

Setting the Transmission Channel/Wireless Radio ID
Use the following procedure to set the transmission channels and
wireless radio IDs of the sender unit and receiver unit. Set the same
channel and ID for both the sender unit and receiver unit. Note that the
procedure is the same for the sender unit and receiver unit.
1
Set a channel.

Press <
8
>.

Turn <
9
> to select the channel
symbol, then press <
8
>.

Turn <
9
> to select <
X
> or any
channel between Ch. <
Y
> and
<
\
>, then press <
8
>.
2
Set a wireless radio ID.

Press <
8
>.

Turn <
9
> to select the ID symbol,
then press <
8
>.

Turn <
9
> to select the position
(digit) to be set, then press <
8
>.

Turn <
9
> to select a number from 0
to 9, then press <
8
>.

Set a 4-digit number with the same
procedure, and select <
;
>.
 When transmission between the
sender unit and receiver unit is
established, the <
D
> lamp is lit in
green.
Transmission channel
Wireless radio ID