Canon 0575B002 User Manual Download Page 87

Page: 87 / 129

Chapter 9

Routine Maintenance

Cleaning The Bottom Plate

Proceed steps 1 to 3 for MP170 on page 84.

Press [Maintenance] repeatedly until <J> appears.

Press [OK].

Inspect the discharged paper. If dust or dirt can be seen on the paper, repeat the cleaning
process.

Cleaning The Protrusions Inside The Machine

If protrusions inside the machine are stained, wipe ink off the protrusions using a swab or
something similar.

Note

If the discharged paper still appears dirty after you have run this clean
process, the inside of your machine is probably extremely dirty.

Clean the inside of the machine in accordance with the following directions.

See “Cleaning The Protrusions Inside The Machine” on page 85.

Important

Before cleaning, be sure to turn OFF the machine.

Caution

Do not touch the transparent film (A), film cable (B), ink absorber (sponge
part) (C), or any metal parts.

(A) (B) (C)

Summary of Contents for 0575B002


































































































































Search results

Summary of Contents for 0575B002

Reviews:

Related manuals for 0575B002

Brands by name

Popular brands

Canon 0575B002, User Manual

Search results

Summary of Contents for 0575B002

Reviews:

Related manuals for 0575B002

Brands by name

Popular brands