manualshive.com logo in svg

Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR, Instruction Manual, Page: 83 / 196

Share
Download
Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR Instruction Manual Download Page 83

83

S

Selecting the AF Point

Manual selection limited to 11 AF points 

(p.166)

 

Since the selectable AF points are 
limited to 11, you can better 
concentrate on framing the subject. 

 

The AF point selection procedure is 
the same as explained in steps 1 and 
2.

Manual selection limited to 9 AF points

 (p.166)

 

The center AF point and 8 peripheral 
AF points are selectable. 

 

Selecting a horizontal AF point is the 
same as explained in steps 1 and 2. 
Selecting an AF point beyond a 
peripheral AF point will set the 
automatic selection mode. 

 

To select a peripheral AF point, press 
the <

S

> button and turn the <

5

>

dial.

C.Fn-13-1, 2

C.Fn-13-3, 4

With C.Fn-13-1/2/3/4, all 45 AF points will be available for automatic 
selection.

Summary of Contents for 0304B001 - EOS 1D Mark II N Digital Camera SLR





































































































































































































Reviews:

No comments