Cannondale Topstone Neo Lefty, Quick Start Manual

Page: 11 / 16

Some final pre-ride checks.
Torque Bolts. Select the correct bit for the stem bolts and install it
into the torque wrench.
Look for the torque specification markings on the front and back
of the stem, as well as the seatpost. If these markings are absent,
torque all stem, seatpost and seat collar bolts to 7 Nm.
Tighten the stem bolts in an ‘X’ pattern and ensure the gap is even
between the stem and faceplate at all four bolts.
Twist Check. Secure the front wheel between your legs and turn the
handlebar. If the handlebar and wheel move independently, the stem
bolts are not tight enough. Use the torque wrench and correct bit to
properly torque the bolts.
Attempt to rotate the handlebar forward and backward in the stem. If
it moves, the stem faceplate bolts are not tight enough. Use the torque
wrench and correct bit to torque the faceplate bolts to specification,
using the same “X” pattern as before.
Grab the front and rear of the seat and attempt to tilt it on the seat
post head. It should not move.
H.
I.
J.
K.
L.
M.
I
K
SET-UP STEP 2 STEP 1 STEP 3 PRE-RIDE CHECK
L
J