24
134942 Rev 1.
English
Trigger / Jekyll
- Owners Manual Supplement
Remote Cable Installation
1. Cut a piece of derailleur housing that
fits from Gemini’s housing stop to the
Gemini remote without interfering with
the rotation of the handle bars. Install a
ferrule on one end of the housing.
2. Place the Gemini remote in Flow mode
by pressing the black button on the
Gemini remote while placing upward
pressure on the silver button.
3. Insert a derailleur cable into the round
hole below the silver button on the
Gemini remote. Feed the cable through
the remote until the cable head is fully
seated.
4. Insert the cable into the cable noodle
end opposite the barrel adjuster. Slide
the cable noodle along the cable until it
is fully inserted into the remote.
5. Insert the derailleur cable into the
Gemini cable housing end with the
ferrule and push it through until the
housing is fully seated in the barrel
adjuster on the cable noodle.
6. Insert the derailleur cable through the
housing stop on the Gemini shock,
then pull the cable until the housing is
fully seated in the housing stop. There
should not be a housing ferrule on this
side of the Gemini housing.
7. Use a 2 mm hex wrench to loosen the
set screw located on the rear of the
Gemini shock cam until there are only 2
threads engaged.
8. Insert the cable between the set screw
and Gemini cam. Pull the cable so the
cable and housing are fully seated and
tight.
9. Tighten the set screw to 1.2 Nm with a
2mm hex wrench to secure the cable.
10. Function Test: Push on the remote’s
silver Hustle mode button, then press
the black Flow mode button.
a. Cable is too tight: the remote cannot
stay in Hustle mode. Reduce cable
tension by turning barrel adjuster
clockwise. If problem persists,
reduce cable tension by loosening
the set screw and resetting cable
tension as described in steps 7-9.
b. Cable is too loose: the cam will not
turn as soon as you engage the lever.
Increase cable tension by turning the
barrel adjuster counter-clockwise. If
problem persists increase cable ten-
sion by loosening the set screw and
resetting cable tension as described
in steps 7-9.
Summary of Contents for Jekyll 2019
Page 35: ......
