background image

english  /  deutsch  /  español  /  italiano  /  francais

28

29

• 

DECREASED CONTRAST IN DISPLAY SCREEN: 

Battery is weak and must be replaced.

•  

DISPLAY IS BLANK: 

Change the battery or reset the computer.

• 

DISPLAY SHOWS PARTIAL DIGITS:

 Reset the computer.

• 

SPEED/DISTANCE NOT RECORDING: 

Check sensor/magnet alignment. Make sure that the sensor is no more than 

3mm from the magnet.

• 

ENTIRE SCREEN IS DARK:

 Unit may have been over exposed to direct sunlight. Move the bike to the shade. The data 

will be OK.

• 

NO OR ERATIC SPEED DISPLAY:

 1) Distance between magnet and transmitter is too great (3 mm maximum).  

2) Interference from electro magnetic field. 3) Sensor wires may be fully or partially severed.

TROUBLE SHOOTING

SPECIFICATIONS & RANGES

TIME OF DAY

  • 24 hours with one-second resolution
  • Functional in either 12 or 24 hour formats

ODOMETER

  • 9999.9 miles or kilometers
  • Trip Odometer: 999.9 miles or kilometers
  • 1 mile or 1 kilometer resolution

WHEEL SIZE

  • Wheel circumference measured in millimeters

SPEED

  • 0-199.9 MPH or KPH
  • 0.1 MPH or KPH resolution

CADENCE (IQ114 

only

)

  • 0-480 RPM with 1 RPM resolution

STOPWATCH

  • 99h 59m 59s 
  • 1 second resolution

Summary of Contents for IQ108


















Reviews: